Can't see my drawing

[EngineerHearder]

New to the forum but have been using SW/Draftsight for about 3 yerars. I installed Draftsight on one of my towers and can't see my drawing. If I "select all" in the command line, it highlights the geometry but it all disappears once I release it. I've had this problem once before but can't remember how I fixed it. Any help would be greatly appreciated.

 

[CorBlimeyLimey]

Try thread1480-346835
The answer may already have been answered there.

 

[EngineerHearder]

Nope. Thats not it. The command line is fine. Typing "select" & the "all" is the only way I get anything to show up. I can also put a box around the window and things will highlight in the dashed line font but it all disappears as soon as I release it. I had this problem once before but cant remember how I fixe it. It's like the layers are hidden.

 

[EngineerHearder]

My apologies for quasi-repeating my self

 

[Jboggs]

Are all your lines the same color? And is it the same color as the background? Don't laugh. I've seen it happen.

 

[CorBlimeyLimey]

Oops ... that link was supposed to be forum1480

 

[CorBlimeyLimey]

See thread1480-305461

Also check the graphics driver is up to date.

 

[EngineerHearder]

Don't see my last post so here's a repeat. @Jboggs - had that happen once upon a time. I checked that first just in case as I do that kind of stuff to myself frequently. You have to be able to laugh at yourself and sometimes the simple stuff bears repeating. This PC was just rebuilt (software) a few weeksa go but decided tcheck the driver any way. Seems that was the problem and it's working fine now. Thanks so much for the help guys!