Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Capacitor Quality

Status
Not open for further replies.
Engineer85

Engineer85

Electrical
Jul 21, 2006
8
I have got capacitors of two different brands. I used multimeter and found that both are of same Farads i.e. (10 micro Farads).

How can i find which one is of better quality?

Thank you.

Regards,
E
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Search google for ESR test, There is a simple test you can perform. All you need is a 100 & 5 ohm resistor, 100KHZ generator and a scope. There are big differences in capacitors. Everyone should build or own some sort of ESR tester. Lot of info out there. sencore.com has some simple tech tips to start understnding capacitors.
 
Upvote 0 Downvote
Read the spec sheet!

Bear in mind that purity of capacitance is a different measure of quality than physical construction - some very good capacitors in terms of low parasitics are a nightmare in assembly.


----------------------------------
image.php

If we learn from our mistakes I'm getting a great education!
 
Upvote 0 Downvote
You have to define what you mean by "quality". Voltage, capacity, ESR, temperature, temperature coefficient, tolerance, life expectancy, , , , , , Taste?

There is no passive component with more aspects to be considered by a user than a capacitor.

Keith Cress
Flamin Systems, Inc.-
 
Upvote 0 Downvote
I hesitate to correct you Smoked. But, wouldn't "There is no component with more aspects to be considered by a user than a capacitor" be better?

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
Could be.. But if I exclude "passive" then you open things to active, hence integrated circuits, hence micros. Some I work with have three hundred pages of spec sheets. I suspect you could argue that there are more aspects in that case than even the hard-to-pin-down capacitors.

That was my thinking Skogs..

Keith Cress
Flamin Systems, Inc.-
 
Upvote 0 Downvote
I understand that Smoked. But then again, I could (if I wanted to) argue that those are not details that you have to consider in detail when you select a micro-processor. Or do you really evaluate every single instruction when you select one. I don't. I look for things like foot-print, supply voltage, speed, sometimes architecture and peripherals and sometimes temperature range.

So, I (and I really hope that you get my tounge-in-cheek) maintain that there are many more dimensions in the decision space whan it comes to capacitors than any other component.

As I said, I could have argued that way. But I didn't really.

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
Well ... If you are comparing all caps verses all micros I would argue that the micros far "out complex" caps! List every single capacitor parameter and I argue the micro question would be many times more daunting.
43cuc6f.gif


Keith Cress
Flamin Systems, Inc.-
 
Upvote 0 Downvote
It is an entertaining conversation we have here, Smoked. And even somewhat interesting. Have you really, I mean really, considered all capacitor types and all parameters?

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
Heck no! But all I suggest is you write down every possible parameter. I would guess what, about 25? All micros? I would guess about 250 different aspects.

Capacitors are stuck with only 2 wires coming out. A huge handicap in the battle of complexity. [machinegun]

Keith Cress
Flamin Systems, Inc.-
 
Upvote 0 Downvote
Hmm..

Just you wait!

Sorry, haven't got the time right now.

Will surely be back. Be prepared!

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
OK. It may be as you say. I admit it unwillingly.

But. Any computer guy can probably select a micro - can he select a capacitor?

Why is that so?

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
Skogsgurra said:
Any computer guy can probably select a micro - can he select a capacitor?

Why is that so?
Click to expand...
Probably because more processor specs are taught in school than cap specs. Caps are considered plug-n-play devices in most schools, and even working voltages are typically ignored. Since most micro circuits work at 5V and below, almost every cap you pull off of the shelf is going to work. Speeds are rarely beyond a few 10's of kHz (external to the processor), so again, there's not much need to worry about things like ESR or package inductance... those are best left to experience gained on the job (or so they feel).

When I was teaching some analog comm labs at Purdue, I was careful about not leaving out those kinds of details. While I may not have covered everything, I tried to stress that there are always a myriad of specs one might need to look at that aren't necessarily obvious to the average engineer. As it is, I still need to pull up Google and refresh my memory on the different cap types any time I start work in a "field" I haven't worked in for a while (such as audio, video, RF, etc.).

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
Upvote 0 Downvote
Hey! Smoked!

"there are always a myriad of specs"

I like that. That's a lot more than your measly 250!

(A myriad is 10 000)





Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
Friends again?

I had a real killer ready for you if you had even thought about using that leg argument. Wish you had...

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
Varying point of view/agreement should not be the basis of continued friendship!

Friends always man. [santa3]

Legs?? = Leads?? Out with it! Lets hear it. [infinity]

Keith Cress
Flamin Systems, Inc.-
 
Upvote 0 Downvote
Well..

Which one is the more complex organism? A human (two legs) or a centipede?

Gunnar Englund
--------------------------------------
100 % recycled posting: Electrons, ideas, finger-tips have been used over and over again...
 
Upvote 0 Downvote
A capacitor is 1 circuit element, while a microprocessor is millions of circuit elements. That is why a micro is more complex than a capacitor.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lucas88
  • Locked
  • Question
Aluminum electrolytic capacitors
Replies
10
Views
6K
waross
waross
Ethnan
  • Locked
  • Question
QUALITY 230/240 50Hz AC supply with PHASE ANGLE CONTROL
Replies
0
Views
193
Ethnan
Ethnan
PaulKraemer
  • Locked
  • Question
lamp circuit w/ capacitor bank? 3
Replies
12
Views
188
Compositepro
Compositepro
metalman89
  • Locked
  • Question
Ultra Low Profile Capacitor? 1
Replies
9
Views
110
sreid
sreid
metalman8357
  • Locked
  • Question
Power Supply Smoothing without Capacitor? 1
Replies
9
Views
153
LionelHutz
LionelHutz

Part and Inventory Search

Sponsor

Back
Top Bottom