Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Caprolan RC vs. Fibermesh Fibers

Status
Not open for further replies.

gyoung

Automotive
Sep 10, 2003
2
0
0
US
Can anyone give me some insight on either of these products? What is better and why??
 
Replies continue below

Recommended for you

Caprolan-RC is a Nylon 6 product produced by Honeywell. It is made with virgin nylon 6 and is produced specifically for fiber reinforcement of concrete. Quality parameters are monitored closely to ensure the product is the same on all shipments. It is not product downgraded from other intended uses as can be the case in some other products.
 
nylon fibers absorbs water during mixing process.
therefore it is effective the water / cement ratio.
Wo do not recommend to use nylon fibers
however other fibers like polyfibers (polypropylene) have much better performance.
ýn you question, it is not clear that which purpose will you use fibers in concrete...

Please send me an email to discuss your project spiengtr@ttnet.net.tr

Murat ERBAS / Electrical Engineer M.B.A.
SPI Engineering & Foreign Trade Ltd.
Acibadem AYPIM POB 242 Istanbul 81020 Turkey spiengtr@ttnet.net.tr
Tel : +90.216.342.76.07
 
Status
Not open for further replies.
Back
Top