Apr 3, 2011 #1 robertolourdes Mechanical Apr 3, 2011 2 any suggestion how to remove the broken tap from the blind hole the part material is cast SAF 2507.
Apr 3, 2011 #2 BillPSU Industrial Oct 28, 2003 832 Drill the tap with a carbide drill and use an easy out. if that doesn't work drill the hole and break up the tap. Upvote 0 Downvote
Drill the tap with a carbide drill and use an easy out. if that doesn't work drill the hole and break up the tap.
Apr 4, 2011 #3 atmax Aerospace Jan 26, 2009 4 portable EDM works well, EDM rods will come in various sizes it will core out the center for easy break up of tap. Upvote 0 Downvote
portable EDM works well, EDM rods will come in various sizes it will core out the center for easy break up of tap.
