Carbon Steel Forgin Suppliers

[Seeker88]

Hi folks,

I am looking to put out enquiries for Carbon Steel forged rings for us to machine into girth (body) flanges on some heat exchangers. Does anyone know of some good reliable US or European suppliers who can supply rings up to 85" OD x 7" thk in A105N material.

Any help you could offer would be greatly appreciated

Charles

 

[chaulklate]

Try these guys:

Forged Vessel Connections, Inc. in Houston, Texax

http://www.forgedvesselconn.com

Forged Componenets Inc. in Humble, Texas

http://www.forgedcomponents.com

Trouvay & Cauvin, Houston, Texas

http://www.tcbluebook.com

All of these manufacture custom forgings, I'm unsure what their limitaions are.

 

[unclesyd]

In addition to the above here are 3 more that we have used for flange rings.

http://www.mcinnesrolledrings.com/index.asp

http://www.lenapeforge.com/capability.htm

http://www.steelforge.com/ssf_pchart.htm

 

[Geof]

Here's another:

http://www.scotforge.com/

 

[kenvlach]

Another:
Ladish Co.

http://www.forging.com

Weight: Up to 56,000lbs. Diameter: Seamless, rolled rings up to 28ft. Materials: Every forgable material.

European subsidiary: ZKM Forging in Stalowa Wola, Poland.

http://www.zkmforging.com

 

[rmw]

Try this folks;

http://www.fpitx.com/

rmw

 

[mayda]

Italian fabricators building equipement for us have used FOMAS S.p.A near Milan, Italy:

http://www.fomas.it/

Very high quality, very large capability.

Last job was 304H tubesheet 162 inch diameter x 6.375 inch thick (finished dimensions). FOMAS also did rough machining and full U/T scan per ASME SA745 QL-1 / QA-1.