Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Carburetion of Propane in Petrol engine

Status
Not open for further replies.

steele371

Mechanical
Nov 18, 2010
1
I am looking for info regarding the best way to send low pressure vaporized propane into a gasoline carb. Has anybody here made a clever part to connect the vaporizer to the venturi?
 
Replies continue below

Recommended for you

What needs to be clever about. It normally comes in the kit and is a piece of pipe of appropriate size.

Regards
Pat
See FAQ731-376 for tips on use of eng-tips by professional engineers &
for site rules
 
Kits I've seen for my generator are a regulator and a tube that sticks into the venturi. I think some of the kits replace the carb completely if you never plan on using gasoline again.
 
Check Google for small engine conversion kits. There are three basic conversion methods, a drilled in spud (the method you describe), an add on venturi, and a total replacement. I have several running with the add on venturi.

Franz

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor