Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cast Iron Valves Rating Tables

Status
Not open for further replies.
nicorvp

nicorvp

Mechanical
Nov 6, 2002
8
0
0
US
Hallo,
in the piping specification i am working with I have GGG40 valves. I have found that the corresponding ASTM is A395. Is it true? And where can I find rating tables?
Thanks for your help
Nico
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Fireal86
  • Locked
  • Question
ATEX certification/IP rating
Replies
5
Views
6
cairnsafety
cairnsafety
NDTHAND1992
  • Locked
  • Question
Opinions / Facts - New Small-Bore Valves installed into existing "tested" piping assemblie
Replies
2
Views
15
gwalkerb
gwalkerb
Capta1nChaos
  • Locked
  • Question
Pressure Safety Valves in Low Pressure ASME Systems
Replies
6
Views
10
The Obturator
The Obturator
BickVess
  • Locked
  • Question
UG-44(b) ASME VIII-1.Control of final loads at the nozzle flange face, for the B16.5 rating
Replies
3
Views
4
TGS4
TGS4
PipelineEgr
  • Locked
  • Question
Temperature de-rating for flanges
Replies
3
Views
4
david339933
david339933
Back
Top