Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cathodic protection design

Status
Not open for further replies.

rachba

Materials
Oct 6, 2015
18
Hi,
I will design a cathodic protection system for an already existing tank with a 100m of diameter, under the tank at 500mm depth a layer of PE sheet is spread entirely
so - because it's not a new tank i can't use the grid anode under the tank
- because of the PE layer I can't use the beep anode groundbed
- because of the 90m diameter and also the PE layer i think that a shallow distrubuted anode around the tank is not recommended

Any suggestion please?
 
Replies continue below

Recommended for you

It sounds like you need to talk with you CP designer and a horizontal directional drilling contractor, together.


= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor