Catia Disassembly (GSD) 1

[CAD2015]

Hi,

I used a sketch to create a simply soccer free kick wall:

Than, I used GSD Disassembly on the sketch and created three different zones.

The problem that I encounter is that the lines created from the sketch are not linked, so if I modify the geometry of the sketch, the lines will not follow.
Is there another tool (instead of Disassembly) that keeps link with the sketch?

Thanks



CAD 2015

 

[itsmyjob]

you could use the OUTPUT profile function in the sketch, this will keep associativity with sketch geometry.

Eric N.
indocti discant et ament meminisse periti ​

 

[CAD2015]

Itsmyjob,
Thanks a lot!
Beatus, qui prodest, quibus potest!


CAD 2015

 

[itsmyjob]

thanks for the comment

Eric N.
indocti discant et ament meminisse periti ​