CATIA display freezes after saveas menu ou other menu

[RASMoreira]

I have Catia V5R20 installed in a lenovo x61T (graphics card has chipset Mobile Intel 965 Express). Everything goes well until I open some menu (for example the "save as" window, or the "options" windows). Then the display freezes the current image and everything I do (viewpoint change, operations etc) are simply not shown. The software continues to work but the image that appears in the screen is frozen and identical to the last screen I had before open the "save as" command.
To solve this I have to open something new (create a new part or a new drawing) or simply by opening an existing file). Then I change to the window of the initial part and everything is ok (viewpoint and any modifications made will the display is frozen are simply updated).

Any idead how to solve this? I already installed last display drivers, etc, but nothing seems to solve this.

 

[ferdo]

Did you checked if is supported by DS ? I mean, is it a recommended hardware by Dassault?

Regards
Fernando

https://picasaweb.google.com/102257836106335725208

- Romania

https://picasaweb.google.com/103462806772634246699/

- EU

 

[sudhakarn]

Hi,
Please try re installing a new version of catia.