Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Catia Freezing for a minute all the time 1

Status
Not open for further replies.

engjeff

Automotive
Apr 24, 2007
84
Catia keeps locking up and thinking about something for about a minute quite often. Then it comes back to life and works fine. Has anyone experienced this? Is it trying to page something then timing out?
 
Replies continue below

Recommended for you

Don't clear your catsettings, that's not the problem. This is most likely the autosave feature, by default it is set to autosave every 30 minutes. If I recall, the setting is in Tools>Options>General, on the first page.

I suggest you use the incremental backup option instead, I have had very good fortune with that. Or you can switch autosave off entirely, that's up to you and how much you might risk in case of the program crashing or the power going out...

Cheers,

Mark
 
Thank you for all your input.

Mark, I changed it to incremental and everything is running smoothly again! Thank you very much.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor