engrnick
Mechanical
- May 19, 2010
- 49
Hi all,
i imported my CATIA step model into pro and can't seem to get rid of a yellow outline showing up in several of my parts in my drawing. It shows through the wire frame, similar to the way a datum curve shows through. the model has no hideable features, and remains when the part is cut.
It's simple enough to delete the model from my assembly, redo, and re-insert this rectangular part, but I'm wondering if I did something wrong to get this yellow outline showing up through all my wireframe model.
Thanks!
WF4.0,
Catia V5
Step file
i imported my CATIA step model into pro and can't seem to get rid of a yellow outline showing up in several of my parts in my drawing. It shows through the wire frame, similar to the way a datum curve shows through. the model has no hideable features, and remains when the part is cut.
It's simple enough to delete the model from my assembly, redo, and re-insert this rectangular part, but I'm wondering if I did something wrong to get this yellow outline showing up through all my wireframe model.
Thanks!
WF4.0,
Catia V5
Step file