Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Catia V5 install in win32, with PM2 configuration
- Thread starter RobmV5
- Start date
the prerequisites for Qchecker are
CATIA P2 platform:
• at least EI2 + MD2 + PM2 + SA2 configuration
These are the minimum configurations that should be installed, they do not have to be licensed.
PM2 - CATIA - Prismatic Machinist 2 Configuration
is installed in my installation but that is an everything install so I cannot specifically confirm the installation of that particular configuration on its own.
CATIA P2 platform:
• at least EI2 + MD2 + PM2 + SA2 configuration
These are the minimum configurations that should be installed, they do not have to be licensed.
PM2 - CATIA - Prismatic Machinist 2 Configuration
is installed in my installation but that is an everything install so I cannot specifically confirm the installation of that particular configuration on its own.
- Status
