Sep 19, 2013 #1 CAD2015 Computer Jan 21, 2006 1,945 US Hi, How could I convert a CGR file into Catia Part? It shouldn't necessary be converted in solid only! Thanks MZ7DYJ
Hi, How could I convert a CGR file into Catia Part? It shouldn't necessary be converted in solid only! Thanks MZ7DYJ
Sep 19, 2013 1 #2 ferdo Mechanical Jul 4, 2002 2,837 RO Hi, I don't know in v6 how is working but for v5 I've done in the past a small macro which had the logic bellow: - open cgr by selecting in a folder - save as model (v4) - open model and save as CATPart (no solid, only surfaces) You can try something similar. Regards Fernando https://picasaweb.google.com/102257836106335725208https://picasaweb.google.com/103462806772634246699/ Upvote 0 Downvote
Hi, I don't know in v6 how is working but for v5 I've done in the past a small macro which had the logic bellow: - open cgr by selecting in a folder - save as model (v4) - open model and save as CATPart (no solid, only surfaces) You can try something similar. Regards Fernando https://picasaweb.google.com/102257836106335725208https://picasaweb.google.com/103462806772634246699/
Sep 20, 2013 Thread starter #3 CAD2015 Computer Jan 21, 2006 1,945 US Thanks! MZ7DYJ Upvote 0 Downvote
