centreline to outside radius dimension

[G1DESIGN]

can anyone tell me how to dimension a diameter using a centreline to outside radius in inventor i cant get it to work
it is constantly going back to the ctr point of the rad

thanks mike

 

[jlcochran1]

In what mode? In IV 9 in part /sketch mode you can dimension a radius by clicking on the circle and then right-clicking the mouse and selecting radius.

 

[SeanDotson]

Click on the centerline then RMB and select Linear Diameter...then select the outside edge (from memory might be a bit off)

Sean Dotson, PE

http://www.sdotson.com

http://www.mCADForums.com

CAD Professionals & Consultants Discussion