Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

cerrobend machining matrix

Status
Not open for further replies.
alloyhunter

alloyhunter

Aerospace
May 24, 2006
1
how do I effectively remove all the cerrobend or utectic alloy from the inconel machined turnings so this inconel material can be recycled back into ingot for casting.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Depending upon the Cerrobend alloy you could Sieve the turnings in Hot water.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dogbural
  • Question
machining a long tube (380mm)
Replies
8
Views
3K
Gr8blu
Gr8blu
MF Afif
  • Locked
  • Question
Element deletion on the broken chips during machining
Replies
1
Views
633
Stick.
Stick.
CTengIS
  • Locked
  • Question
Machining marks and surface texture
Replies
1
Views
245
CWB1
CWB1
quizzical1
  • Locked
  • Question
316SS machining vendors....
Replies
1
Views
160
bcd
bcd
dshore
  • Locked
  • Question
machining silicon brass rod in 144" lenghts
Replies
8
Views
233
3DDave
3DDave

Part and Inventory Search

Sponsor

Back
Top Bottom