Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

changing line thickness of broken-out section view

Status
Not open for further replies.

gepo

Mechanical
Jul 11, 2004
5
Hi,

How can I change the line thickness of the spline that outlines the broken-out section? Now it is categorized under "visible lines", so when I change line thickness now the most part of the drawing gets another line thickness...
Anyone who can help me on that one ?

Thanks
 
Replies continue below

Recommended for you

Turn on the Line Format toolbar. There are buttons on it to change thicknes, color and style of selected edges.
 
I tried it before.
This doesn't work with broken-out section lines....
 
With your drawing open, go to Tools > Options > Document properties > Line font then make you selection from the available options.

[cheers] from (the City of) Barrie, Ontario.

[bugeyed] I tried sniffing Coke once, but the ice cubes got stuck in my nose [shocked]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor