USMechE6
Mechanical
- Sep 21, 2016
- 50
Hi All,
We currently are using a Sun CKGB-XCN in our hydraulic manifold. It needs to be replaced and I am considering Eaton 4SK140-3-S based on part availability. The application specs (pressure, flow, etc.) seem to be a match but I am not familiar enough to know if they can be interchanged. Their dimensions look similar and both say T-17A cavity. Would these be drop-ins for each other? Does the cavity size dictate this alone? I'm not familiar with any standards there may be.
We have a similar potential swap between Sun CKIV-XCN and Winner CK-10A-3C-03-N, cavities T-19A and 19A-3, respectively.
Any insight would be much appreciated.
We currently are using a Sun CKGB-XCN in our hydraulic manifold. It needs to be replaced and I am considering Eaton 4SK140-3-S based on part availability. The application specs (pressure, flow, etc.) seem to be a match but I am not familiar enough to know if they can be interchanged. Their dimensions look similar and both say T-17A cavity. Would these be drop-ins for each other? Does the cavity size dictate this alone? I'm not familiar with any standards there may be.
We have a similar potential swap between Sun CKIV-XCN and Winner CK-10A-3C-03-N, cavities T-19A and 19A-3, respectively.
Any insight would be much appreciated.
