Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Chiller pressure???
- Thread starter filocco
- Start date
Water pressure should be between 4 and 5 bar (60 to 70 psi). More important, the water flow for a 1500B should be 50l/min (13.2 gal/min). That is for the resonator only; you'll need some additional cooling flow for the machine side (external optics, lens).
- Status
