Jun 3, 2011 #1 pitg Materials Nov 19, 2010 17 Are there any standards that deal with valves or other pressure containing parts for chlorine applications? Thanks in advance
Are there any standards that deal with valves or other pressure containing parts for chlorine applications? Thanks in advance
Jun 4, 2011 #2 gafoorkti Materials May 18, 2011 51 Hi Pitg, Applicable standard: CHLORINE INSTITUTE PAMPHLET 6 CLASS II. Chlorine Institute Pamphlet 6: Piping Systems for Dry Chlorine Chlorine Institue / 01-Apr-1993. Contains information on selected pipe, valves, & fittings suitable for use with dry chlorine (gas or liquid) within the range of -150F & -300F. Please refer the below link and Flow serve supplies valve for chlorine service. http://www.chlorineinstitute.org/Bookstore/ProductDetail.cfm?ItemNumber=2536 Upvote 0 Downvote
Hi Pitg, Applicable standard: CHLORINE INSTITUTE PAMPHLET 6 CLASS II. Chlorine Institute Pamphlet 6: Piping Systems for Dry Chlorine Chlorine Institue / 01-Apr-1993. Contains information on selected pipe, valves, & fittings suitable for use with dry chlorine (gas or liquid) within the range of -150F & -300F. Please refer the below link and Flow serve supplies valve for chlorine service. http://www.chlorineinstitute.org/Bookstore/ProductDetail.cfm?ItemNumber=2536
Jun 14, 2011 #4 NGiLuzzu Mechanical Dec 17, 2002 558 Pitg, also Euro Chlor issues technical pubblications (including papers, presentations, recommendations, guidelines and best practices, etc...). See http://www.eurochlor.org/safety Hope this helps, 'NGL ___________________________________ Upvote 0 Downvote
Pitg, also Euro Chlor issues technical pubblications (including papers, presentations, recommendations, guidelines and best practices, etc...). See http://www.eurochlor.org/safety Hope this helps, 'NGL ___________________________________
