choice components in asm section view

[alexasa]

Is possible to choice what components do you want to be affected by the section cut in your drawing view?

 

[Heckler]

Are you using Pro/e 2001 or WF 2.0?

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 2.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)

Do you trust your intuition or go with the flow?

 

[Tofflemire]

Hi,

Yes, you can. After you place your section view, right click on view, and pick properties, then you will have a menu to change the section line spacing, angle and to exclude it. You will have to click next to go through all the parts that have been sectioned.

Tofflemire

 

[alexasa]

I'm using WF2

Tofflemire: I know that option, but it just work in crosshatching of the pieces cut.

I want cut pieces and others not cut (I mean pieces afected by cut and not by crosshatching only)

 

[atlarson]

Alexasa,

If you select "Excl Comp" in the MOD XHATCH menu, the part appears un-cut by the cross section. This only works for a total cross section, not for an area cross section, and the menu selections described are for 2001, not Wildfire.

Andy