Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

chrome vanadium alloy steel 2

Status
Not open for further replies.

calincandea

Mining
Jan 24, 2012
10
Hi All,

I have to make some rolled rings (70 mm thick) 2.5 m diameter. The only thing that i know about the material is 13CrV4. I can't find it. Can anyone give me any info. I need the mechanical proprieties to see what would be the force needed and if there are any risks for cracking. I need this tonight :)

Thanks for your help.

Calin
 
Replies continue below

Recommended for you

Are you sure with the material designation? 13CrV4? Perhaps 13CrMoV4?
 
Sorted out. I checked with the customer. It is 13CrMoV4. Thanks.

I feel stupid now. It was my first post. But it helped.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor