Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

civil 3d surface modeling from a topo map

Status
Not open for further replies.

kurt01j

Civil/Environmental
Nov 6, 2017
1
Hi,
Can someone please help me. I'm trying to model a 3d surface from a topographic map in autocad civil 3d. The surface is the location of a site development for a proposed building. I was informed that civil 3d can help me to quickly deal with the grading and drainage if I was able to get the surface in the software.
 
Replies continue below

Recommended for you

Civil 3D has a steep learning curve. If you're starting from zero knowledge and don't have time for a training course, then I would recommend running through the tutorials that come with the program. They will give you a good foundation for using the program and probably run through most of what you'll need to grade a site, but there is no magic "Grading & Drainage" button that will do it for you.

#
 
If you have learned the fundamentals in a college surveying course, you s/b able to do it in 2D without the need for civil 3D.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor