Cladding & corrosion allowance

[HOUARI YAHIAOUI]

Hello Experts;
I'm facing at a datasheet of a vessel where it is mentioned that the material of constrcution is : CS+6mm CA+ Cladding.
The question is that I know that where cladding is used no additional corrosion allowance is needed, is there any norm or standard that confirm this?!
cordially

 

[marty007]

Only the client can answer this question, ask your customer.

 

[SnTMan]

It's possible some components are clad, others are not. Hard to know without detailed information such as drawings or calculations. I think it might be best to contact the designer.

Regards,

Mike

The problem with sloppy work is that the supply FAR EXCEEDS the demand