Aug 2, 2010 #1 Rodrigodigiacomo Petroleum Aug 2, 2010 1 I use CNODE to imput displacements in my anchor, is this the best way to make it?
Aug 3, 2010 #2 DSB123 Mechanical May 16, 2002 1,288 It works very well so why not so long as the results are realistic - which they should be. Upvote 0 Downvote
Aug 5, 2010 #3 C2it Petroleum Jun 27, 2007 504 You could equally just impose displacements, e.g. 0 = fixed, then you don't need cnodes. Upvote 0 Downvote
