Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CO2 Flow

Status
Not open for further replies.

5656

Mechanical
Joined
Oct 23, 2003
Messages
5
Location
CA
I have to regulate a CO2 tank/bottle to achieve a flow of 500ml/minute. I am looking for a manufacture that can produce a basic preset pressure reducer, that will get the pressure down to a manageable level and would mount to a standard CO2 bottle. On the other end of the line, I would need an orifice that will achieve the desired 500ml/minute. I need to find the simplest, most cost effective way of doing this. I was hoping to be able to use 1/8” hose on the outlet side of the orifice.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top