The company that I work is trying to cocure decorative laminates (thermoplastic cover sheets) onto our thermoset prepreg parts. We would thermoform the laminate first then place it in the mould. Does anyone know if this is feasible and where I can get further information on this subject? The Decorative Laminate companies all suggest I apply the coverings with an adhesive after curing the prepreg.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cocuring Decorative laminate
- Thread starter SAParker
- Start date
