Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cold Energy from LNG

Status
Not open for further replies.
dylant

dylant

Chemical
Mar 8, 2007
5
0
0
US
There're lots of cold energy wasted during regassification of LNG. Do you have ideas in mind what can we use this for?
Thanks.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Since heat can only go to cold, not much. If you had a cryogenic plant to make lets say liquid air and make purity O2 and N2 and Ar, that might be useful. A NGL recovery plant maybe, Chill water for the office two miles away.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JamesKerr
  • Locked
  • Question
Material transformed from coil into plate.
Replies
3
Views
34
EdStainless
EdStainless
AMINATAISSA
  • Locked
  • Question
Choosing between forged and fabricated from plate nozzles flanges and flange.
Replies
4
Views
32
EdStainless
EdStainless
CMStewart
  • Locked
  • Question
Trying to Calculate Resilient Modulus of Wood from data
Replies
0
Views
13
CMStewart
CMStewart
ASDcunha
  • Locked
  • Question
Reduction of Standard equal tees (ASME B16.9) by removing 10 mm from "Run length" 5
Replies
4
Views
9
XL83NL
XL83NL
ASDcunha
  • Locked
  • Question
Reduction of Norsok Compact (L-005) Flange length from 75 mm to 55 mm by cutting 20 mm 2
Replies
2
Views
18
davefitz
davefitz
Back
Top