Collets for Single Spindle Automatics

[travisak]

Hi
1st i want to say is, don´t beat me.. i am noob but i need your help. I´m trying to find a "collet". I found many different kinds of collets but i need this one :

http://img243.imageshack.us/img243/173/klestinasd2.jpg

It´s real copy of one collet that i held in my hand some time ago. I don´t care about proportions for now. Just help me find this collet.
Sorry for my english. I don´t know if this thread should be here in this topic, it´s my first.

 

[eromlignod]

http://www1.mscdirect.com/CGI/GSDRVSM?PACACHE=000000039126376

 

[travisak]

thanks but it´s helpless.. this collet can´t be found through MSC.. i tried at least 5times to find it.. :.(

 

[SincoTC]

You don't say what make of machine or collet chuck you are using. That would be a good starting point for your search.

I realise that your illustration is only an approximation but it seems to show a thread for a drawtube combined with a short taper and simple slits that don't make for parallel grip if the stock diameter varies much. It's not a type type I'm familiar with, but auto's aren't my field.

You may find these people some help:

http://www.gemcolletsindia.com/single-spindle-automatics.html

Trevor Clarke. (R & D) Scientific Instruments.Somerset. UK

SW2007x64 SP3.0 Pentium P4 3.6Ghz, 4Gb Ram ATI FireGL V7100 Driver: 8.323.0.0
SW2007x32 SP4.0 Pentium P4 3.6Ghz, 2Gb Ram NVIDIA Quadro FX 500 Driver: 6.14.10.7756