Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Commissioning Procedure

Status
Not open for further replies.

asade

Chemical
Oct 19, 2010
65
Dear All,

I need insight on how to develop a commissioning/start-up procedure for a compressor station. What are the sequences that need to be adhere to and recorded?
The station is been refurbished after a long time of shutdown.

Your expertise and wisdom is highly appreciated.

Thanks for your anticipated cooperation.

Regards,


I am what I am by His grace
 
Replies continue below

Recommended for you

Hello asade,

"Compressor station" is rather generic...

Natural gas forwarding station? Skid-mounted mobile air compressor? Some other gas?

Capacity? Pressure ranges? Driven electrically, by some sort of natural-gas fuelled internal combustion engines, or gas turbines?

Prevailing climate? Age of equipment? How well was the equipment mothballed at the time of being taken out of service? Attended or unattended plant? If unattended, compatibility of equipment monitoring facilities with today's technology? What technology is being retained and what replaced/upgraded?

Where are you in all of this? Working for the compressor station owner, employed by a sub-contractor, having this dropped in your lap by a commissioning firm, or what?

Needing information to make recommendations...

CR

"As iron sharpens iron, so one person sharpens another." [Proverbs 27:17, NIV]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor