Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

comparison between inconel and ferralium

Status
Not open for further replies.

edfmm

Materials
May 6, 2003
4
We need to know the comparison between inconel and ferralium, because the existing valve material is ferralium but the new material valve is inconel. Please advice us whether inconel can replace ferralium
 
Replies continue below

Recommended for you


you need to be more specific about the valve service.

ultimately the valve supplier has to warranty(or needs to be involved) with the materials selection.
 
Hi edfmm

You will need to look at your specific requirements because in many instances the properties of Inconel(600) are inferior to Ferralium(255) eg lower design stress, poorer resistance to erosion and abrasion. However, if your Ferralium component was overdesigned you may find the Inconel more cost effective.....

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor