Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Composite Fibre Modeling

Status
Not open for further replies.
Jalandhari

Jalandhari

Aerospace
Mar 24, 2005
3
Hi

I have a fill-warp arrangement of carbon fibres ,no resin but held in place by two thin tapes.
I was wondering how would i simulate the fibre behavious in abaqus since abaqus only models the laminas.
Please suggest

thanks

 
Status
Not open for further replies.

Similar threads

M
  • Question
Modeling elasto-plastic behaviour of NiTi
Replies
1
Views
1K
FEA way
FEA way
IcarusAero223
  • Question
3D composite coupon convergence issue
Replies
5
Views
2K
FEA way
FEA way
bkal
  • Locked
  • Question
Composite modal damping
Replies
2
Views
124
GregLocock
GregLocock
abc123ali
  • Question
Different results in cohesive zone modeling for the same data input
Replies
8
Views
3K
FEA way
FEA way
simulation_engineer_2022
  • Locked
  • Question
Modeling viscous behavior of material
Replies
1
Views
149
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom