Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

compressed air

Status
Not open for further replies.

zipthetrip

Industrial
Jul 19, 2004
23
What type or size air compressor would I need to produce 20.87 cu. Ft/min? Any help with this will be greatly appreciated.
 
Replies continue below

Recommended for you

you need to define "at what pressure" you deliver the volume. Then look it up in an air compressor catalog, pick the next larger size.

TygerDawg
 
You also need to know how long you need to flow your air. Is it short bursts, or is it 24-7? Your local retailer should be able to help you out.
 
Cal/OSHA is pretty good at finding laws to enforce.
Your air tank needs a permit and a (manufacturer provided) ASME stamp. Set it for 120 psi max; extra regulations above 125 psi.

Lots of other consideration if you need clean, dried air or have to install piping.
Ken
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor