Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CON-AID CBR-PLUS

Status
Not open for further replies.

swazimatt

Civil/Environmental
Aug 19, 2009
242
Hi does anyone have any information regarding the above stabilizing agent on clayey material. expected increase in CBR of the in-situ material?

Only info i can find is from the manufacturers
 
Replies continue below

Recommended for you

the product literature reads like you are applying a defloculent. It seems like something that is sprayed onto an otherwise messed up subgrade that you then have to work throughout the soil. Adding a liquid to a wet subgrade may allow for a disruption to the diffuse double layer, but you'd then have to let the excess water go somewhere. . .

I'd think a good dosing of Calgon would do about the same thing and I'm not even sure that that would work!

I'd be interested in a third-party engineering review and would likely be the skeptic anyhow.

f-d

¡papá gordo ain’t no madre flaca!
 
Agree with fattdad...have seen similar that were, in essence, snake oil.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor