Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Concentric vs. Eccentric Manhole Cones 1

Status
Not open for further replies.

CivilG

Civil/Environmental
Apr 15, 2015
21
What is the purpose of a eccentric manhole cone versus a concentric manhole cone? When do you use either. Do you use a eccentric cone because steps need to be bolted into a vertical surface for climbing in and out?

Thanks,
 
Replies continue below

Recommended for you

yes. Also, you can rotate to miss curb lines etc...
 
Try climbing a ladder that's tilted toward you.


Mike Halloran
Pembroke Pines, FL, USA
 
All the steps I see in manholes are HDPE or similar.

Hydrology, Drainage Analysis, Flood Studies, and Complex Stormwater Litigation for Atlanta and the South East -
 
some agencies around here do not allow steps on sewer manholes. makes it too easy to avoid following the SWP which requires a fall harness and tripod
 
Correct. The flat surface allows for placement of a ladder or manhole steps. The ladder is recommended to be frp or stainless steel construction for corrosion resistance.

Chris Eberly, PE
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor