Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Conductivity meter

Status
Not open for further replies.

josm0113

Mechanical
Sep 21, 2015
4
For an internship I need as much information as I can about a Conductivity meter. Can some help me with some information about how it operates, the goal of this meter, what you can do with it, et cetera. The internship is about a cleaning plant.
kind regards
 
Replies continue below

Recommended for you

Google is your co-worker.

Good luck,
Latexman

To a ChE, the glass is always full - 1/2 air and 1/2 water.
 
Refer to Section 8.17 in B. Liptak's Instrument Engineer Handbook Vol.1: ftp://ftp.unicauca.edu.co/Facultades/FIET/DEIC/Materias/Instrumentacion%20Industrial/Instrument_Engineers__Handbook_-_Process_Measurement_and_Analysis/Instrument%20Engineers'%20Handbook%20-%20Process%20Measurement%20and%20Analysis/1083ch8_17.pdf


Dejan IVANOVIC
Process Engineer, MSChE
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor