Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connection Design - rotation

Status
Not open for further replies.

ron8655

Structural
Nov 9, 2006
12

I am at present designing a connection of a beam to column using 4 bolts with an end plate. There is rotation in the beam, i have looked in standards and see nothing about designing for this. How is it done? Although the torsional moment is small 2kNm i would just like to know how to check if connection is okay. Thanks
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor