Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Connection lost when saving

Status
Not open for further replies.
ctopher

ctopher

Mechanical
Jan 9, 2003
17,421
0
36
US
This started a few weeks ago.
Ever time I click on save (any file), I get the "lost connection" error.
I can not figure out what causes this. Any ideas?
I'm the only one in the office with this error.
My laptop uses Windows 7.
I usually have to click on cancel 1-2 times, then start over until it will finally save.

IMG


Chris
SolidWorks 11
ctopher's home
SolidWorks Legion
 
Replies continue below

Recommended for you

Sort by date Sort by votes
We had this on and off for 5 years on our network. Funny thing is, that we have been free of this scourge since we went to SW2011 & Win7. Many peolple have found that cycling thru all your configurations will get it so you can save.
 
Upvote 0 Downvote
Wireshark is a packet sniffer. If you are at work they might frown on it. It allows you to see all the packets going in and out of your interface card. It will show what is happening at that level and thereby uncover whether it is a network issue or not. You might need an IT guy to decipher the output. But it will highlight connection issues that even a novice can see there is a problem.

TOP
CSWP, BSSE
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

borsht
  • Locked
  • Question
Tolerancing grayed out on drawing when adding & modifying hole dimensions
Replies
1
Views
11
SBaugh
SBaugh
fcsuper
  • Locked
  • Question
What's the standard that specifies the size of center marks and when they should be added to holes?
Replies
6
Views
23
TheTick
TheTick
supercub
  • Locked
  • Question
When I used CTL-Mate to mate parts
Replies
1
Views
2
BEMPE16524
BEMPE16524
dabiz7
  • Locked
  • Question
Coordinate system disappears when rotating
Replies
1
Views
2
SBaugh
SBaugh
borsht
  • Locked
  • Question
I've lost my "Rotate view down" function on my down arrow key. Can I get it back?
Replies
2
Views
4
borsht
borsht
Back
Top