May 20, 2015 #1 asvipin Mechanical Nov 27, 2014 36 0 0 IN I want to model tightening of a bolted joint.After defining the contact, how tightening of nut can be defined. How the torque requirement can be evaluated?
I want to model tightening of a bolted joint.After defining the contact, how tightening of nut can be defined. How the torque requirement can be evaluated?
May 20, 2015 #2 Mustaine3 Mechanical Feb 25, 2015 1,645 0 0 FR Convert the torque into a axial force and see Abaqus/CAE Manual 22. Bolt loads Upvote 0 Downvote
May 20, 2015 Thread starter #3 asvipin Mechanical Nov 27, 2014 36 0 0 IN I want to evaluate the torque required for producing specified axial tension in the bolt. Upvote 0 Downvote
