Aug 1, 2012 #1 mocxi Industrial Jan 19, 2009 3 0 0 CA Hi all, I want to simulate heat transfer from part A (20x10x2 (mm): for length, width and thickness) to part B (the same dimension with part A) by Ansys Ls-dyna . Which contact types I should use for this analysis. Thank you very much
Hi all, I want to simulate heat transfer from part A (20x10x2 (mm): for length, width and thickness) to part B (the same dimension with part A) by Ansys Ls-dyna . Which contact types I should use for this analysis. Thank you very much
Aug 5, 2012 #2 missil3 Aerospace Apr 25, 2012 52 0 0 I have only used lsdyna and not ansys lsdyna but in dyna we use contact_surface_surface_thermal contact card. Here is an example : http://www.dynaexamples.com/thermal/welding Upvote 0 Downvote
I have only used lsdyna and not ansys lsdyna but in dyna we use contact_surface_surface_thermal contact card. Here is an example : http://www.dynaexamples.com/thermal/welding