tickk30
Automotive
- Feb 7, 2005
- 6
Could someone please tell me if there is an easy way to plunge in the CENTER of multiple closed circles, ie. spring pockets or counterbores, on one process.
For example, I want to mill the contour of 5 spring pockets,and plunge in the center of each pocket, the program only recognizes the 1st pocket, and wants to start at that center for each pocket after that.
For example, I want to mill the contour of 5 spring pockets,and plunge in the center of each pocket, the program only recognizes the 1st pocket, and wants to start at that center for each pocket after that.