Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ControlLogix PLC to a PanelView 600 Serial Comms Issue

Status
Not open for further replies.

svankley

Computer
May 21, 2004
4
Has anyone connected a ControlLogix PLC V16 to a PanelView 600 with DF1 serial??

-I have the mapping all set up in RSLogix5K.
-I have the RSView ME Enterprise comms set up as a ControlLogix process through DF1.

Apparently, you cannot use the COntrolLogix processor in RSView ME even though it's an option - you supposedly have to "fake" it by telling RSView the CNTRLX PLC is a PLC5??

Anyone had any luck getting these to play nice?

Steve
 
Replies continue below

Recommended for you

You should call your local A-B distributor applications engineering folks for a fast answer. If not that, then A-B has their own technical discussion forum on their website. That is, IF you can actually find it in that labryinth they call a website.

TygerDawg
Blue Technik LLC
Virtuoso Robotics Engineering
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor