Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

convection boundary condition (FEM thermal simulations)

Status
Not open for further replies.

ppppraxxx

Mechanical
Oct 16, 2015
6
DE
Hello,

I am using T joint pipe for thermal simulations (using quarter model of Pipe with the branch ), and doing "transient thermal analysis" (3 load steps) to get the temperature profile during ramp up and ramp down of temperature in the pipes. I am applying convection boundary condition on the inside surface of the pipe and the branch (T joint). but when i solve in "ANSYS Workbench" i get an error saying 'unknown error occurred please check the solver output for more information.
Can anyone help me please.....

i don't know how to proceed now. please help.
 
Replies continue below

Recommended for you

Sorry about my multiple postings sir, I found out other ralevant group after my first posting, i will delete the rest!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top