Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

convert Kato bearing p/n 012-52200-00 to standard p/n (SKF, AFBMA etc) 1

Status
Not open for further replies.

electricpete

Electrical
May 4, 2001
16,774
We have a Kato 700KW , 875kva , 277/480vacm 60C rise, Type 19647 generator (nameplate attached)

The nameplate states the bearing is p/n 012-52200-00
Does anyone know the equivalent bearing, in terms of AFBMA number or SKF part number?

(I am looking to identify bearing fault frequencies).


=====================================
(2B)+(2B)' ?
 
Replies continue below

Recommended for you

Disregard - I found it. Appears to be SKF 1320J

=====================================
(2B)+(2B)' ?
 
Actually, I have a doubt about my cross references. If anyone has that info readily accessible, it would be helpful.

=====================================
(2B)+(2B)' ?
 
The last KATO cross reference I have was from when KATO was owned by Reliance, couldn't find your PN on it.

Houma Armature in Houston used to have about the best cross reference/update list for generator bearings I knew of. Might give them a try and see if they are willing to share the info for your purposes.

Regards, Mike L.
 
Small world, that's a local shop that we've sent motors to. I'll give them a call.
Thanks.


=====================================
(2B)+(2B)' ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor