Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

convert workbench file to Femap?

Status
Not open for further replies.
rob768

rob768

Mechanical
Joined
Aug 3, 2005
Messages
441
Location
NL
Hello,

is it possible to convert an Ansys Workbench file to a format readable by Femap? We want to evaluate a design as part of a failure analysis. however, the standard output of Workbench is not compatible with the output Femap expects for an Ansys file (*.ans, *. cdb)
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
IJR
  • Locked
  • Question Question
On how and where to insert command snippets inside Workbench mechanical
Replies
2
Views
1K
IJR
IJR
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
md_salem
  • Locked
  • Question Question
how to extract mode shapes vectors from ANSYS WORKBENCH file ?
Replies
0
Views
523
md_salem
md_salem
md_salem
  • Locked
  • Question Question
how to write a parameter in APDL code inside workbench file ?
Replies
15
Views
3K
md_salem
md_salem

Part and Inventory Search

Sponsor

Back
Top