Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Converting 3D dwg to 2D dwg

Status
Not open for further replies.

VFR750

Mechanical
Joined
Apr 17, 2003
Messages
4
Location
GB
I need to change a 3D autocad r2000 dwg file into a 2D drg in ucs plan world view.
Drawing has been produced with various ucs and elevation settings which need to be converted to zero elevation and zero thickness. Some ucs appear to have been deleted from the drawing.
I have used the command CHANGE to try and alter properties but get messages 'no parallel to ucs' and 'cannot alter elevation of objects with differing Z values'which ever ucs I use. I have tried the changeprop dialogue box with no sucess and tried converting to dxf and re importing to no avail. .....any suggestions
 
Hi,

take this thread555-3656

Win NT4.0 (SP6),
ACAD 2000i (SP2), ADT 3.0 (SP3),
ACAD 2002, ADT 3.3,
OCÈ 5200

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top