Converting assembly in WF to SolidEdge 1

[mjb60]

Hello,
I'm currently using ProE Wildfire. I've just completed a large assembly. I would like to covert it so that it can be used by our vendor which uses SolidEdge software. Any suggestions or comments would be appreciated.
Thank You,
Matt

 

[looslib]

Save a Copy As STEP or Parasolid.


"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[pascual]

Just take care your vendor open it as an assembly, not a part