Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Converting Autocad to Microstation J

Status
Not open for further replies.

thenrys

Mechanical
Feb 4, 2005
1
I'm hoping someone can help me. I have 3D drawings in Autocad 2004 that I need to convert to Microstation 'J' to fulfill a customer requirement for "As-builts". The drawings are 3D conveyor system layouts that our company has a propietary 'plug-in' for which brings in parametric 3D blocks. We also make extensive use of Xrefs for building layers, structural steel, etc...

Please let me know if you have any ideas or suggestions.

Todd
 
Replies continue below

Recommended for you

I thought both could export and read DXF's.

"Everybody is ignorant, only on different subjects." — Will Rogers
 
Off topic hint: change "As-Built Drawing" to "Record Drawing"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor