I am in the process of consolidating and checking common parts at our place. I need to verify that all part configurations are driven by a design table. Currently part configurations are either created manually/have design tables/ or a combination in one file. Is there a way to convert manual configs into a design table, or is this a manual conversion only?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Converting configurations to design tables?
- Thread starter DrGonzo
- Start date
SolidWorks 2003 will add your configurations and custom properties to the design table - if you have that option activated.
Edit your design table definition...
So the short answer is YES.
Insert a new design table and select the appropriate options.
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
We'll raise up our glases against evil forces.
Whiskey for my men, beer for my horses!
T.K.
tatejATusfilter.com
Edit your design table definition...
So the short answer is YES.
Insert a new design table and select the appropriate options.
We'll raise up our glases against evil forces.
Whiskey for my men, beer for my horses!
T.K.
tatejATusfilter.com
- Status
Similar threads
- Locked
- Question