Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cooling outdoor swimming pool

Status
Not open for further replies.

BIPVguy

Mechanical
Jul 23, 2007
37
Dear all,

I have been tasked to estimate cooling capacity for cooling outdoor swimming pool water based on :
1)WxLxDepth=5mx24mx1.8m.
2) Desired Swimming pool temperature is within range of 26C-29C.
3)MAx Ambient air temperature is 46C, high RH.
4) Make-up water temperature 26C

Any advise/link/calculation example would be greatly appreciated.

Thanks muchly.
BIPV guy
 
Replies continue below

Recommended for you

Are you trying to cool the pool, or use the pool as a heat sink?
 
Isn't the worst case basically htc of about 3 W/m^2-K applied across the entire surface area of the pool multiplied by the temperature difference, plus solar load?

TTFN

FAQ731-376
 
As IRstuff pointed out,you need to consider both radiant(Watt/m2 basis) and convection load based on Delta T(46-26).Make sure you work out U values based on local wind velocities.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor